Showing posts with label How To. Show all posts
Showing posts with label How To. Show all posts

Friday, October 24, 2014

Chalk Painted Wooden Trunk



My husband has a wooden trunk his dad built for him to take all his gear to scout camp. It has lived in various ways around our homes and for awhile lived in the garage. Here I needed a table for our living room and decided to try it out. It seems to fit the space fairly well and is actually tall enough to serve as a table.



It's stained wood with brass latches, 
and silver metal handles. 


It was kinda a chilly morning, good day to light a fire and get to work. 


First step was two coats of Anne Sloan Olive. Yep, the same color as my Union Jack dresser behind. 

I could have stopped there, but I didn't want this piece to be the same as the dresser.
So I got out a can of Country Chic paint that I had used on my dining room table and slathered some on. This part was just slopping some white over the olive, I'm going to rub it in, so no need to be as careful.


Messy looking, right? 


Then comes the next step, getting an old towel and getting it damp. Be sure to squeeze out the excess, you don't want it dripping wet. I fold the towel and wipe lightly back and forth, pressing down harder in the areas I want more wear. I use a couple fingers wrapped in the towel to really rub across the wood trim, distressing those areas down until a bit of wood shows. 


Difference between the white washed side, and just the olive.


This side slopped with paint. I painted the hardware too.. they didn't match anyhow. I can always rub some off after.

I worked in sections, paint a side, then wipe-wipe-wipe. I folded and refolded the towel to expose clean damp sides and wiped against the grain of the wood first and then with the grain to smooth. 


After wet distressing.

Now most sane people would stop there... but I wanted a touch of a third color. I had a can of this Anne Sloan from another project. I rinsed my towel and grabbed a dry paint brush.

Using the brush to dab a bit of blue on my damp towel. I then rubbed a bit of blue on the corners and trim and here and there on the surfaces, not all over. My thought was, If this is an old shipping trunk, it would have paint transfer from rubbing on other trunks in the cargo hold. So why not add a bit of rubbed color on areas that would have been touching?


Corners and edges are good places for this. After I used a clean side of my towel and rubbed it into the other colors. 

I also rubbed on the hardware so the metal shines through a bit.

The next step is wax.
 I decided to use the Country Chic Natural Wax. It looks like a tiny container...but you just rub the brush around on the top, brush across the wood and it actually goes on very thin. You can just see a slight shine to the areas you wax. I then use a scrap of flannel to buff. I waxed the dining room set and this trunk and have just a slight indention on the wax. 


And here it is, all done and back in it's place. I changed up the decor on top. Going with a wood bowl of pumpkins, a white milk bottle with some hydrangeas from the yard and a candle. 



Before and After

Linking up to:














Wednesday, October 22, 2014

My Bubbling Cauldron DIY



How to make a mess free bubbling cauldron, that is kid safe and fun to look at.

First I found a black plastic cauldron. Mine isn't big.. it's a smaller cheepo one. You could easily find something bigger, check out thrift stores.

I then bought a Gemmy Fire and Ice light at Home Depot. Our Home Depot is done with Halloween and on to Christmas already, but I found them here also. I also saw that Grandin Road had a plug in version that stays on all the time, where as mine is battery operated and you have to clap or stomp to get it to light.




It makes a very cool effect, like watery flames.


Set in the center of the cauldron.



Next you need some sheer white fabric, this happens to be a curtain panel. Again, thrift stores are brimming with these curtains for a couple dollars. You could even try a colored one for a different look.


I added it to the pot. 


I stuffed it in, and around the light, but not over the top of it.


This is how it looked, I decided it was a bit flat so I pulled up two edges a bit. Still leaving an opening for the light to reflect on the ceiling. 



The ceiling effect is pretty darn cool.


It looks like bubbling flames, but no worries about fingers exploring the pot. And if you want it inside, unlike dry ice, no water mess. Bonus you get cool ceiling effects for your party. 


Overall, I'm pretty happy with it. Though I may upgrade to the plug in version at some point. Maybe when I find one on sale. ;)


Linking up to:









Friday, October 3, 2014

Making Pillows From Pottery Barn Napkins



I love Pottery Barn's seasonal pillows. They always seem to have just the fabric and print that I would love adding to my home. This year they offered their "painted pumpkin" accessories and I fell in love with how soft the colors were, and how well they would transition from Fall to Halloween to Thanksgiving. Three months of use for that print. Perfect!


 Not so much the price. I didn't want to buy the outdoor pillows, I don't like storing pillows with built in inserts, takes up way too much space. I would have to spend over $60 to get two pillow covers for my sectional. In looking at the other items in that line I noticed they had a set of 4 napkins. And they measure 20" square. Plenty of fabric for a pillow. The napkins cost around $25 ( they are sold out now)


I picked out some fabric from my stash for the back side of the pillows. If you wanted you could simply sew two napkins together and stuff with an insert or poly-fill, but I wanted a cover I could remove and adding a simple back allows you to make 4 pillows. (or use the other napkins around the house) In this case I picked a natural colored linen blend. I already had it, so it didn't add cost to this project. 


Next I cut two pieces of fabric the same height and about 3/4th the width of the pillow. I'm making an envelope opening, no need to fiddle with sewing zippers or buttons. 

Next I did a double fold and sewed a seam to cover the raw edges that will be the opening side.

I sewed this seam on both back pieces. I then lay the pieces over the back side of the napkin and pin in place while turning the edges over. I pin it so the edge just covers the seam Pottery Barn put when the finished the napkins. 


The two pieces will overlap in the middle and I simply tuck the top edges under each other and pin.

Using my machine I top stitch over the original seam. This seam will now look like a small flange on the finished pillow. Go slow.. don't forget to remove the pins on the underside as you go.. and I use a finger pressed on the seam to make sure my fabric is still under it while I'm sewing.


The end result is a pillow that fits an 18" insert well. 

The back side.. (needs an iron)

I made a second one also, choosing one that showed more of the orange pumpkin.

If you wanted a 20" pillow you could pull out the napkins finished edge and sew a regular edge.. I may do that with the other two. For now I will enjoy my two new pillow covers and use my other napkins around the house. 





 Shabby Art Boutique







Liz Marie Blog
Club Chica Circle